Emisora MX-12 2'4Ghz Hott

Descripción rápida

Specification

Dimensions (LxWxH) 190 x 175 x 115  mm
Operating voltage 3,4 ... 4.8  V
Frequency 2400 ... 2484,5  MHz
All-up weight, approx. 770  g
Range approx. 4000  m
Charging rate 150  mA
Temperature range -15 ... 55  °C
Aerial length 120  mm

 

Más detalles

219,99 €

With 6 functions control the mx-12 HoTT lets the advanced RC model builder to check multitude numerous models. The use of Graupner HoTT 2.4-GHz transmission technology Ensures great functional reliability through bidirectional communication transmitter and receiver Between, with integrated telemetry, voice output via headphone output, and ultrafast response times.
The transmitter has 10 model memories. Programming by keys. A contrast-rich, 8-line, blue-lit graphic display Ensures perfect display of all setting parameters and telemetry data. Telemetry data and additional model memories can be stored on a micro-SD memory card. (Later after update)
USB connector for reading out and storing model memories and for firmware upgrades.
Voice output via headphone output is available as an option.

Microcomputer remote control System with state-of-the-art 2.4 GHz Graupner HoTT technology
Bidirectional Communication between transmitter and receiver
5 different languages (German, Inglés, French, Italian and Spanish) possible via software update. For availability of the respective language, see Download area.
Servo cycle times of 10ms can be selected for digital servos
Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor
Aerial, foldable Short
Operation and programming based on the proven concepts of mc-19 to mc-24
A contrast-rich, 4-line, blue-lit graphic display Ensures perfect monitoring of settings and parameters: such as model type, model memory, clocks, and operating voltage
6 Control functions
Free assignment of all switches
10 model memories
4 switches / keys, including March 2nd-stage-switches, February 1-stage switch, 1 key
Modes 1 to 4 are freely selectable
Key lock function to Prevent unintentional operation
Display change from main menu to telemetry main menu using the ESC key
Numerous telemetry display, programming, and analysis functions in the transmitter display Directly
3 flight phases can be programmed
Extensive Programmes for fixed-wing and helicopter models
Swashplate limiter
Servo travel adjustment: can be separately in September for all servo channels and for each end value
Sub-trim to the neutral position in September of all servos
2-stage expo / dual-rate system, individually adjustable, can be switched During flight
Mixer functions Programmable failsafe function »Hold positions« or »Advance to pre-set" Single adjustable separately for each servo channel
Stop watches / countdown timers with alarm function
Model copy function for model memories
The September includes:

Graupner HoTT mc-12 microcomputer telemetry transmitter with built-in NiMH 1500 mAh transmitter battery, Graupner HoTT GR-12 receiver, and 200mA transmitter charger

General HoTT features:

Simple, extremely fast binding
Range test and warning function
Low-voltage warning
Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply HoTT-Smartbox With the
Binding of any number of receivers for channel expansion (max. of 32 channels)
Up to 4 servos can be controlled Simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
Maximum immunity to interference through frequency hopping and Optimised broad channel spread
Intelligent data Transmission with correction function
Extremely fast rebinding, even at max. distance
Telemetry analysis in real time

Productos relacionados